INTRODUCTION OF lED FUll-COLOR SYNCHRONIZED CONTROL SYSTEM |
1.Giga Technolongy
Venritabl Gig a techolongy.One sending card support the max pixels:Model701:1280*1024;model702:2048*640;two cards are cascaded:2048*1152.single nerwork cabel supports the max pixels:model701:1024*640,1280*512;model702:1600*400,2048*320
2. Pixel by pixel Correnction and Unit box Correction Function
Pixel by pixel correnction supports four kinds of correction model:single pixel,2*2pixels,4*4pixels,8*8pixels;andthe max correction is 6144 pixels/module.and brightness 256 levels for red,green,blue.Every unit box correction is used to adjust the chromatism among every Uint box;and brightness 256 levels for red,green,blue.
3. Intelligent Identification Function
The intelligent identigication program can recogize every kind of scanning mode and every tpye of signal trend of all kinds of doubel-color,full-color(real pixel and virtual pixel) drive boards,and the accuracy rate is 99%.
4. Gray Level 0---Gray Level 66536(64k) are Optinal
Users can adjust the gray level from 0 to 66536 levels according to requirement of displays,making the display achieve the most desirable effects.
5. Optional Refresh Frequency,Synchronous function
Refresh frequency are adjustbale from 10HZ to 3000HZ,and the refresh frequency and phase-lock function can make the display refreshlocked at ntegral multiple of computer diaplay,avoiding the image to been torn,and ensuring the image to be perfect.The phase-lock synchronous range s from 47HZ to 76HZ.
6. Super Loading capacity
Full-color receiving card whit gray level4096(Model 4k) and refresh frequency can support 512*128;full-color receiving card(model 16k,only for static) whit gray level 16384 and refresh frequency 300HZ can contorl 160*64,(Remarks:the drive board must realize high frequency 30HZ)
7. Double network cables switch automatically
The A and B ports of the receiving card can be both used as input ports or output ports.Users can adapt two computers to control a display at the same time ,when one is out of oeder,the other will replace it automatically;Users can alsouse one computer whit double network cables to control a display,When one is out of order,the other willtake place of it automatically,making the display work normally all time.
8. Multi-display synchronous and combination functions.
Supporting one sending card to controlmulti-display can be willful combination,synchornous display,and independentplay,etc.through shorcut key.
9. Brightness 256 Levels Automatic Regutation
The function of brightness 256 levels automatic regulation can make the display brightness regulation more effcient.
10.Voice transmission Function
Model 702integrates the voice transmission ,and requires no audio cable to transmit audio signats to the display.Double 24bits and 64KHZ Hi-fi digital analogy and modulus switch to transmit the voice,making display achieve the perfect video effect.
11.Upgrading program Online
If program of receiving card needs to be upgraded,just open the display power,and upgrade it through Led Studio,no need to remove the receiving card from the display.
12.No Toggle Switch
No toggle switches on the receiving card ,all the setups are set through Led Studio.
13.Test Function
Roeceiving card has the test function, no sending card needed; can test the display directiy, such as bias, gray level, red ,green, biue, etc.
14.Super Long Transmission Distance
The max transmission distance is 170M (actual measure); normal transmission distance is 140M.
 |